ET32C Car Signal Generator Multimeter Coil Solenoid Relay Control Vehicle Maintenance Wave Signal Source Output Waveform Storage
iProGadgets Repair Tools ET32C Car Signal Generator Multimeter Coil Solenoid Relay Control Vehicle Maintenance Wave Signal Source Output Waveform Storage
Features:
Specifications:
Signal generator parameters:
Multimeter parameters:
Package includes:
Features:
- Adjustable signal parameters: The output frequency of the signal generator is adjustable from 1HZ to 9999HZ; the output amplitude is adjustable from -12V to +12V
- Multiple signal output: It can output square wave, sine wave, combination wave (square wave N+N, sine wave N+N), scanning wave, and DC wave.
- Automotive signal simulator: Can simulate Hall-type and magnetoelectric crankshaft and cam signals. Supports crankshaft and cam signal simulation for gasoline and diesel vehicles
- Support magnetoelectric signal scanning or Hall signal scanning
- Signal storage: The instrument supports 50 groups of signal waveform storage, and can store waveforms in specified locations
- Combined wave signal: The missing tooth signal can be set arbitrarily (for example, combined wave 58+2, 10+1) without connecting to a computer
- Scanning wave signal: It can output scanning wave to simulate the process of crankshaft cam signal running from low speed to high speed
- Analog voltage output :-12V to +12V adjustable, step value 1V
- Coil control: Supports ignition coil control, solenoid valve control, and relay control (only supports coil control of 30V/1A and below)
- Multimeter: Measure DC voltage, AC voltage, resistance, diode, continuity, capacitance, frequency, and duty cycle. Quantity function
- The internal power supply of the equipment is isolated to prevent electric shock
Specifications:
- Display screen: 2.8 inch 320 * 480 resolution
- Touch screen: Not supported
- USB interface: Type-C USB
- Battery: Built-in 4.2V lithium battery
- Storage temperature: -20~60 ℃ (-4~140 ℉)
- Working temperature: 0-50 ℃ (32-122 ℉)
- Working humidity: <85% RH (non-condensing)
- Product size: 134*69*25mm
- Product weight: 125g (excluding accessories)
Signal generator parameters:
- Sine wave/square wave frequency range: 1Hz~9999Hz
- Sine wave/square wave frequency step: 1Hz
- Sine wave/square wave peak range: -12V~+12V
- Sine wave/square wave peak step: 1V
- Scanning wave scanning time range: 1s~999s
- Maximum number of combined wave combinations: 99+99
- Output voltage range: -12V to +12V
- Output voltage step: 1V
- Coil control power: Below 30V/1A
- Waveform storage: 50 sets
- Duty Setting: 1%~99%(only for square wave )
Multimeter parameters:
- Maximum DC input voltage: 1000V
- Maximum AC input voltage: 750V
- Maximum measured resistance: 40MΩ
- Maximum measured capacitance value of capacitance: 100uF
- Maximum frequency measurement: 50KHz
- Duty cycle measurement range: 0.1%~99.9%
- Diode measurement range: 0V~1.5V
- Maximum resistance value for on/off detection: 30Ω
- Display: 4000 counts
- Updated: 3 times per second
Package includes:
- 1 x Signal Generator Multimeter
- 1 x Test Leads
- 1 x Crocodile Clamp Wires
- 1 x USB Cable
