Fnirsi 2C53P Touch Screen Portable Digital Oscilloscope Multimeter Signal Generator 3In1 2 Channel 50Mhz 250Ms/S 19999 Counts

Testing & Power Supply Fnirsi 2C53P Touch Screen Portable Digital Oscilloscope Multimeter Signal Generator 3In1 2 Channel 50Mhz 250Ms/S 19999 Counts

Features:

• Integrates the 50MHz bandwidth oscilloscope, 4.5-digit high-precision multimeter, and 10M signal generator functions into one unit. It features a 4.3-inch IPS touchscreen, enabling multi-faceted and precise electronic signal detection and analysis
• Easy to manage oscilloscope imaging, which can be connected to the computers via USB cable for secondary analysis, making professionalism more convenient. Support saving/viewing/deleting imaging to ensure professional and convenient data management. Powerful waveform computing ability, real-time, accurate addition, subtraction, multiplication, and division operations, in-depth analysis and processing of complex signals, waveform computing display clearer, help in signal processing and troubleshooting.
• This signal generator features a 12-kind adjustable waveform, encompassing sine waves, rectangular waves, sawtooth waves, half waves, full waves, positive stepped waves, inverse stepped waves, direct current signals, exponential rise/fall, multiple audio signals, and sink pulses.
•  Supports DCvoltage, ACvoltage, high current, low current, resistance measurement, capacitance measurement, temperature measurement, diode measurement, and on/off measurement functions,
• The combination of FPGA+MCU+high-speed ADC architecture guarantees smooth and crisp waveform visualization. The G+G tempered glass screen and a shock-resistant silicone bezel makes the device is not only resistant to wear but also effortlessly portable, adapting seamlessly to various harsh environments. Enhanced with an intelligent burnproof feature and a dual fuse system, it ensures safer operation even in the event of misconfiguration, further enhancing user safety
• This device supports FFT spectrum analysis, mathematical operations, cursor measurement, X-Y mode, and other functions. It is equipped with 19.6K LUTs logical resources and real storage depth and can save up to 5 groups of measurement data. This allows for in-depth analysis and visualization of data management.
• The operation interface is simple and intuitive, with a one-button Auto function for quick setup, a 20M bandwidth limiting function for precise positioning of weak signals, and multiple triggering modes to adapt to complex measurement needs so that every measurement is efficient and accurate. 
• A built-in 4000mAh high-capacity Li-ion battery provides long-lasting power support. The lightweight and portable body design makes it easy to carry around

• Battery: 1 * built-in 4000mAh battery (included)
• Screen size & resolution: 4.3 Inch (480*272 pixels) IPS display
• Screen material: surface tempered glass
• Architecture: ADC+MCU+FPGA
• Backlight: brightness can be set
• Charging interface: Type-C (5V/2A)
• Language: Chinese, English, Pyccкий, にほんご, español, Português, Deutsch, 한국인
• Item size: 145 * 98 * 35mm
•  

• Channel: Dual channel
• Analog bandwidth: 50MHz
• Real-time sample rate: 250MSa/s
• Storage depth: Up to 64kByte
• Input impedance: 1MΩ
• Time base range: 10ns/div - 10s/div
• Vertical sensitivity: 10mv/div - 10v/div
• Vertical resolution: 8 bits
• Maximum measured voltage: ±400V
• Probe: 1x/10x
• Storage space: 13M
• Bandwidth limit: Support 20MHz limit
• Trigger mode: AUTO/Normal/Single
• Trigger type: Rising edge, Falling edge
• Trigger level range: 8 cells (positive/negative)
• Waveform display mode: XY/YT/Scroll
• Coupling method: alternating current/direct current
• Measured data: Period, frequency, peak-to-peak value, maximum value, minimum value, Average value, effective value, amplitude, duty cycle, pulse width
• Math calculations: 1+2、1-2、1*2、1/2、-1、-2、|1|、|2|、FFT
• Save waveform screenshot: Yes
• Export waveform images from computers: Yes

• DC voltage: 1.9999V/19.999V/199.99V/1000.0V, ±(0.5%+3)
• AC voltage: 1.9999V/19.999V/199.99V/760.0V, ±(1%+3)
• DC current: 19.999mA/199.99mA/1.9999A/9.999A, ±(1.2%+3)
• AC current: 19.999mA/199.99mA/1.9999A/9.999A, ±(1.5%+3)
• Resistance: 19.999MΩ/1.9999MΩ/199.99KΩ/19.999KΩ, ±(1.5%+3); 1.9999KΩ/199.99Ω, ±(0.5%+3)
• Capacitance: 999.9uF/99.99uF/9.999uF/999.9nF/99.99nF/9.999nF, ±(2.0%+5); 9.999mF/99.99mF, ±(5.0%+20)
• Temperature: (-55~1300℃)/(-67~2372℉), ±(2.5%+5)
• Diode: Yes
• Continuity test: Yes

• Channel: Single-channel
• Frequency: 0-10MHz（Sinewave: 10MHz, other waveforms 5MHz）
• Amplitude: 0.1V-3.0V
• Squarewave duty cycle: 0-100%
• Signal type: sinusoidal waves, square waves, sawtooth waves, half waves, full waves, positive step waves, negative step waves, direct current signals, exponential rises, exponential falls, multi-audio signals, and sync pulses

• 1 x Host
• 2 x P6100 Probe
• 1 x Multimeter Pen
• 1 x Clip Probe
• 1 x Cable