Tooltop ET2010A Digital Oscilloscope Multimeter 1Mhz 2.5MSps Color Handheld Oscilloscope AUTO Waveform Electronic DIY Tools
iProGadgets Repair Tools Tooltop ET2010A Digital Oscilloscope Multimeter 1Mhz 2.5MSps Color Handheld Oscilloscope AUTO Waveform Electronic DIY Tools
Features：
Features：
- 2.5Msps high-speed sampling, 1MHz analog bandwidth, 4000 count digital multimeter.
- One-click visual wave, there are three waveform scanning modes: Automatic/Conventional/Single
- Save function for data and waveform in the measurement; A total of 100 sets of data and 10 waveforms can be saved
- When measuring waveforms, you can set parameters independently, such as time base, amplitude, waveform scanning mode, etc
- REL, effectively eliminates the lead resistance, distributed capacitance, and interference signal
- Multimeter functions include DC/AC voltage/current, resistance, capacitance, frequency, duty cycle, diode continuity test
- Automatic/manual switching for measuring range and display of measurement data and historical data on the same screen
- Overload protection 10A double protective tube, dual protection of the instrument
- Automatic shutdown in case of no operations for 15 minutes: bright backlight and clear display
- Adopt a 2.4-inch color screen display, the display effect is clear
- Higher reliability: No adjustment of the potentiometer is required for panel calibration and internal storage calibration
- Display: 240x320 Color screen
- Backlight: Constantly on
- Battery: AA batteries *3 (Not included)
- Working current: About 65mA
- usage time: More than 10 hours
- Use: 0°C~40°C; <75%RH
- Dimensions: 77*157*25.5mm
- Observation area: 49.0*36.7 mm
- Input resistance: About 10MΩ
- Auto shutdown: 15 minutes or disabled
- Sleep current: About 35uA
- Storage capacity: 100*data, 10*waveform
- Storage: -10°C~60°C; <90%RH
- Weight: About 135g
- Analog bandwidth: 1MHZ
- Channel: 1
- Scan mode: Auto/normal/single
- Vertical sensitivity range: 300mV~100V per grid
- Vertical amplitude accuracy: ±(5%+0.2div)
- Auto-configuration: Auto set time base and vertical amplitude
- Max real-time sampling rate: 2.5Msps
- Input resistance: About 10MΩ
- Time base range: 2.5us~10s per grid
- Time base accuracy: ±(0.01%+0.1div)
- Trigger edge selection: Rising/falling edge
- Automatic measurement function: Vp-p, Vavg, Vrms, HZ
- DC Voltage: 400mV~600V
- DC Current: 4A~10A
- Resistance: 400.0Ω~40.00MΩ
- Frequency: 5Hz~5MHz
- Diode test: Voltage is about 1.5V
- AC Voltage: 400mV~600V
- AC Current: 4A~10A
- Capacitance: 51.2nF~100uF
- Duty cycle: 0%~100%
- Continuity test: Resistance <50Ω, beep
- 1 x Oscilloscope Multimeter(Random Color)
- 1 x Test Leads
