Fnirsi 2C53P Digital Handled Oscilloscope 3 In 1 Multimeter Signal Generator
iProGadgets Repair Tools Fnirsi 2C53P Digital Handled Oscilloscope 3 In 1 Multimeter Signal Generator Touch Screen 2 Channel 50mhz 250ms/S 19999 Counts
Descriptions:
Fnirsi 2C53P 3-in-1 Digital Oscilloscope Multimeter Signal Generator with Touch Screen
FNIRSI-2C53P is a three-in-one dual-channel model launched by FNIRSI with comprehensive functions and high practicality, targeting people in the maintenance and R&D industries.
Word oscilloscope. This device has three major functions: oscilloscope, multimeter and signal generator. The oscilloscope adopts FPGA+MCU+ADC hardware architecture and has
It has a sampling rate of 250MS/s, an analog bandwidth of 50Mhz, a built-in high-voltage protection module, and supports a maximum peak voltage measurement of ±400V; supports waveform screenshots.
Save and view to facilitate secondary analysis. The multimeter function is 4 and a half digits and 19999 points of true RMS, supporting AC and DC voltage and current measurements, capacitance, resistance,
With measuring functions such as diode, continuity, temperature, etc., it is an ideal multi-functional instrument whether used by professionals, factories, schools, enthusiasts or families. Inside
Set up a DDS function signal generator, which can output 12 kinds of function signals. The maximum output of the signal generator is 10MHz, with a step of 1Hz; output frequency, amplitude, and duty cycle
Adjustable. It uses a 4.3-inch 480*272 resolution touch display and a built-in 4000mAh rechargeable lithium battery with a standby time of up to 4 hours. With small size
Provide users with more and stronger practical functions, while also having good portability.
Oscilloscope:
Channel: Dual channel
Analog bandwidth：50MHz
Real-time sample rate：250MSa/s
Storage depth: Up to 64kByte
Input mpedance：1MΩ
Time base range：10ns/div – 10s/div
Vertical sensitivity：10mv/div – 10v/div
Vertical resolution8 bits
Maximum measured voltage：±400V
Probe：1x/10x
storage space：13
Bandwidth limit Support 20MHz limit
Trigger mode：AUTO/Normal/Single
Trigger type：Rising edge, Falling edge
Trigger level range：8 cells (positive/negative)
Waveform display mode：XY/YT/Scroll
Coupling method：AC/DC
Measured data：Period, frequency, p
Descriptions:
Fnirsi 2C53P 3-in-1 Digital Oscilloscope Multimeter Signal Generator with Touch Screen
FNIRSI-2C53P is a three-in-one dual-channel model launched by FNIRSI with comprehensive functions and high practicality, targeting people in the maintenance and R&D industries.
Word oscilloscope. This device has three major functions: oscilloscope, multimeter and signal generator. The oscilloscope adopts FPGA+MCU+ADC hardware architecture and has
It has a sampling rate of 250MS/s, an analog bandwidth of 50Mhz, a built-in high-voltage protection module, and supports a maximum peak voltage measurement of ±400V; supports waveform screenshots.
Save and view to facilitate secondary analysis. The multimeter function is 4 and a half digits and 19999 points of true RMS, supporting AC and DC voltage and current measurements, capacitance, resistance,
With measuring functions such as diode, continuity, temperature, etc., it is an ideal multi-functional instrument whether used by professionals, factories, schools, enthusiasts or families. Inside
Set up a DDS function signal generator, which can output 12 kinds of function signals. The maximum output of the signal generator is 10MHz, with a step of 1Hz; output frequency, amplitude, and duty cycle
Adjustable. It uses a 4.3-inch 480*272 resolution touch display and a built-in 4000mAh rechargeable lithium battery with a standby time of up to 4 hours. With small size
Provide users with more and stronger practical functions, while also having good portability.
Oscilloscope:
Channel: Dual channel
Analog bandwidth：50MHz
Real-time sample rate：250MSa/s
Storage depth: Up to 64kByte
Input mpedance：1MΩ
Time base range：10ns/div – 10s/div
Vertical sensitivity：10mv/div – 10v/div
Vertical resolution8 bits
Maximum measured voltage：±400V
Probe：1x/10x
storage space：13
Bandwidth limit Support 20MHz limit
Trigger mode：AUTO/Normal/Single
Trigger type：Rising edge, Falling edge
Trigger level range：8 cells (positive/negative)
Waveform display mode：XY/YT/Scroll
Coupling method：AC/DC
Measured data：Period, frequency, p
