ET828 2 in 1 Oscilloscope Multimeter 2.5Msps Digital 1MHz Strong Toughness Electric Portable Resistance Test Meter
iProGadgets Repair Tools ET828 2 in 1 Oscilloscope Multimeter 2.5Msps Digital 1MHz Strong Toughness Electric Portable Resistance Test Meter
Features:
Features:
- One-button waveform capture, intelligent and easy to use, improves work efficiency
- 2-in-1: 2.5Msps high-speed sampling, 1MHz analog bandwidth Oscilloscope + 4000 counts display digital multimeter
- Powerful uses: it can be used in different applications such as DIY electrical design, car overhaul, production line, equipment maintenance, and power system
- Color screen display: 2.4-inch color screen, clear waveform display
- Multi-function multimeter: 4000 counts display, fast and accurate measurement of AC/DC current, resistance, capacitance, frequency, duty cycle, diode, continuity
- Oscilloscope parameter independent setting: Auto/Normal/Single scanning modes, time base, amplitude, rising edge, falling edge, and level
- Can store 100 sets of data and 10 sets of waveform. Historical data and real-time display can be displayed on the same screen, greatly facilitating the analysis of data
- Panel calibration and memory calibration coefficients do not need potentiometer adjustment and higher reliability
- Overload protection 500mA/10A double fuse, double protection meter
- Display: 240 x 320 LCD Screen
- Display area: About 2.4 inches
- Backlight: White
- Input resistance: 10MΩ
- Battery: AA battery x 3(Not included)
- Power consumption: About 80mA
- Use time: Low light about 5 hours
- Storage: 100 Data, 10 Waveforms
- Use: 0℃~40℃; <75% RH
- Storage: -10℃~60℃; <90% RH
- Size: 83*160*32(mm)
- Weight: About 195g (without battery)
- Analog bandwidth: 1MHz (limited to ACV oscilloscope)
- Maximum real-time sampling rate: 2.5Msps
- Number of channels: One
- Input impedance: about 10MΩ
- Vertical sensitivity range: 300mV - 100V/grid
- Time base range: 2.5us~10s/div
- Vertical amplitude accuracy: ±(5%+ 0.2div)
- Time base accuracy: ±(0.01% + 0.1div)
- Scan mode: Auto/Normal/Single
- Trigger edge selection: Rising edge/Falling edge
- Automatic setting: Automatically set the time base and vertical amplitude
- Automatic measurement function: Vpp, Vavg, Vrms, Hz
- DC voltage: 400mV/4V/40V/400V/1000V ±(1.5%+10dgt)
- AC voltage: 400mV/4V/40V/400V/750V ±(1.0%+10dgt)
- DC Current: 40mA/400mA/4A/10A ±(1.2%+10dgt)
- AC Current: 40mA/400mA/4A/10A ±(1.5%+10dgt)
- Resistance: 400.0Ω~40.00MΩ ±(1.0%+5dgt)
- Capacitance: 51.2nF~100uF, 10.00mF ±(3.0%+5dgt)
- Frequency: 5Hz~5MHz ±(1.0%+5dgt)
- Diode test: Voltage is about 1.5V
- Continuity test: Judgment Resistance about <50Ω beep
- Fuse: 500mA/250V, 10A/250V
- 1 x Oscilloscope Multimeter (without Battery)
- 1 x Test Pen
